Journal cover Journal topic
Hydrology and Earth System Sciences An interactive open-access journal of the European Geosciences Union
Journal topic

Journal metrics

Journal metrics

  • IF value: 4.936 IF 4.936
  • IF 5-year value: 5.615 IF 5-year
    5.615
  • CiteScore value: 4.94 CiteScore
    4.94
  • SNIP value: 1.612 SNIP 1.612
  • IPP value: 4.70 IPP 4.70
  • SJR value: 2.134 SJR 2.134
  • Scimago H <br class='hide-on-tablet hide-on-mobile'>index value: 107 Scimago H
    index 107
  • h5-index value: 63 h5-index 63
Volume 14, issue 8
Hydrol. Earth Syst. Sci., 14, 1527–1536, 2010
https://doi.org/10.5194/hess-14-1527-2010
© Author(s) 2010. This work is distributed under
the Creative Commons Attribution 3.0 License.

Special issue: Quantitative analysis of DEMs for hydrology and Earth system...

Hydrol. Earth Syst. Sci., 14, 1527–1536, 2010
https://doi.org/10.5194/hess-14-1527-2010
© Author(s) 2010. This work is distributed under
the Creative Commons Attribution 3.0 License.

  10 Aug 2010

10 Aug 2010

Extraction of thalweg networks from DTMs: application to badlands

N. Thommeret1,2, J. S. Bailly4,3, and C. Puech2 N. Thommeret et al.
  • 1CNRS-UMR 8591, Laboratoire de Géographie Physique, 92190 Meudon, France
  • 2Cemagref-UMR TETIS, 34093 Montpellier, France
  • 3AgroParisTech-UMR TETIS, 34093 Montpellier, France
  • 4AgroParisTech-UMR LISAH, 34060 Montpellier, France

Abstract. To study gully spatial patterns in the badlands using a continuous thalweg vector network, this paper presents methods to extract the badlands' thalweg network from a regular grid digital terrain model (DTM) by combining terrain morphology indices with a drainage algorithm. This method will delineate a thalweg only where the DTM denotes a significant curvature with respect to DTM accuracy and relies on three major steps. First, discontinuous concave areas were detected from the DTM using morphological criteria, either the plan curvature or the convergence index. Second, the concave areas were connected using a drainage algorithm, which provides a continuous, thick, tree-structured scheme. We assumed that these areas were physically significant and corresponded to a gully floor. Finally, the thick path was reduced to its main course and vectorised to obtain a thalweg network. The methods were applied to both virtual and actual DTM cases. The actual case was a LiDAR DTM of the Draix badlands in the French Alps. The obtained networks were quantitatively compared, both with a network obtained using the usual drainage area criteria and with a reference network mapped in the field. The CI-based network showed the great potential for thalweg network extraction.

Publications Copernicus
Download
Citation