Journal cover Journal topic
Hydrology and Earth System Sciences An interactive open-access journal of the European Geosciences Union
Journal topic

Journal metrics

Journal metrics

  • IF value: 4.936 IF 4.936
  • IF 5-year value: 5.615 IF 5-year
    5.615
  • CiteScore value: 4.94 CiteScore
    4.94
  • SNIP value: 1.612 SNIP 1.612
  • IPP value: 4.70 IPP 4.70
  • SJR value: 2.134 SJR 2.134
  • Scimago H <br class='hide-on-tablet hide-on-mobile'>index value: 107 Scimago H
    index 107
  • h5-index value: 63 h5-index 63
Volume 15, issue 5 | Copyright
Hydrol. Earth Syst. Sci., 15, 1563-1575, 2011
https://doi.org/10.5194/hess-15-1563-2011
© Author(s) 2011. This work is distributed under
the Creative Commons Attribution 3.0 License.

Research article 25 May 2011

Research article | 25 May 2011

Combining remote sensing and GIS climate modelling to estimate daily forest evapotranspiration in a Mediterranean mountain area

J. Cristóbal1,4, R. Poyatos2, M. Ninyerola1, P. Llorens3, and X. Pons4 J. Cristóbal et al.
  • 1Department of Animal Biology, Plant Biology and Ecology, C-Building, Universitat Autònoma de Barcelona, Cerdanyola del Vallès, 08193, Spain
  • 2Center for Ecological Research and Forestry Applications (CREAF), Universitat Autònoma de Barcelona, Cerdanyola del Vallès, 08193, Spain
  • 3Institute of Environmental Assessment and Water Research (IDÆA), CSIC, Jordi Girona, 18, Barcelona, 08034, Spain
  • 4Department of Geography, B-Building, Universitat Autònoma de Barcelona, Cerdanyola del Vallès, 08193, Spain

Abstract. Evapotranspiration monitoring allows us to assess the environmental stress on forest and agricultural ecosystems. Nowadays, Remote Sensing and Geographical Information Systems (GIS) are the main techniques used for calculating evapotranspiration at catchment and regional scales. In this study we present a methodology, based on the energy balance equation (B-method), that combines remote sensing imagery with GIS-based climate modelling to estimate daily evapotranspiration (ETd) for several dates between 2003 and 2005. The three main variables needed to compute ETd were obtained as follows: (i) Land surface temperature by means of the Landsat-5 TM and Landsat-7 ETM+ thermal band, (ii) air temperature by means of multiple regression analysis and spatial interpolation from meteorological ground stations data at satellite pass, and (iii) net radiation by means of the radiative balance. We calculated ETd using remote sensing data at different spatial and temporal scales (Landsat-7 ETM+, Landsat-5 TM and TERRA/AQUA MODIS, with a spatial resolution of 60, 120 and 1000 m, respectively) and combining three different approaches to calculate the B parameter, which represents an average bulk conductance for the daily-integrated sensible heat flux. We then compared these estimates with sap flow measurements from a Scots pine (Pinus sylvestris L.) stand in a Mediterranean mountain area. This procedure allowed us to better understand the limitations of ETd modelling and how it needs to be improved, especially in heterogeneous forest areas. The method using Landsat data resulted in a good agreement, R2 test of 0.89, with a mean RMSE value of about 0.6 mm day−1 and an estimation error of ±30 %. The poor agreement obtained using TERRA/AQUA MODIS, with a mean RMSE value of 1.8 and 2.4 mm day−1 and an estimation error of about ±57 and 50 %, respectively. This reveals that ETd retrieval from coarse resolution remote sensing data is troublesome in these heterogeneous areas, and therefore further research is necessary on this issue. Finally, implementing regional GIS-based climate models as inputs in ETd retrieval have has provided good results, making possible to compute ETd at regional scales.

Publications Copernicus
Download
Citation
Share