Journal cover Journal topic
Hydrology and Earth System Sciences An interactive open-access journal of the European Geosciences Union
Hydrol. Earth Syst. Sci., 20, 5035-5048, 2016
https://doi.org/10.5194/hess-20-5035-2016
© Author(s) 2016. This work is distributed under
the Creative Commons Attribution 3.0 License.
Research article
20 Dec 2016
iCRESTRIGRS: a coupled modeling system for cascading flood–landslide disaster forecasting
Ke Zhang1,2,3, Xianwu Xue2, Yang Hong2,5, Jonathan J. Gourley4, Ning Lu6, Zhanming Wan2, Zhen Hong2, and Rick Wooten7 1Cooperative Institute for Mescoscale Meteorological Studies, University of Oklahoma, Norman, OK 73072, USA
2Hydrometeorology and Remote Sensing (HyDROS) Laboratory, School of Civil Engineering and Environmental Science, and Advanced Radar Research Center, University of Oklahoma, Norman, OK 73072, USA
3State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University, Nanjiang, Jiangsu, 210098, China
4NOAA/National Severe Storms Laboratory, Norman, OK 73072, USA
5Department of Hydraulic Engineering, Tsinghua University, Beijing, China
6Department of Civil & Environmental Engineering, Colorado School of Mines, Golden, CO 80401, USA
7North Carolina Geological Survey, North Carolina Department of Environmental Quality, Swannanoa, NC 28778, USA
Abstract. Severe storm-triggered floods and landslides are two major natural hazards in the US, causing property losses of USD 6 billion and approximately 110–160 fatalities per year nationwide. Moreover, floods and landslides often occur in a cascading manner, posing significant risk and leading to losses that are significantly greater than the sum of the losses from the hazards when acting separately. It is pertinent to couple hydrological and geotechnical modeling processes to an integrated flood–landslide cascading disaster modeling system for improved disaster preparedness and hazard management. In this study, we developed the iCRESTRIGRS model, a coupled flash flood and landslide initiation modeling system, by integrating the Coupled Routing and Excess STorage (CREST) model with the physically based Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability (TRIGRS) landslide model. The iCRESTRIGRS system is evaluated in four river basins in western North Carolina that experienced a large number of floods, landslides and debris flows triggered by heavy rainfall from Hurricane Ivan during 16–18 September 2004. The modeled hourly hydrographs at four USGS gauge stations show generally good agreement with the observations during the entire storm period. In terms of landslide prediction in this case study, the coupled model has a global accuracy of 98.9 % and a true positive rate of 56.4 %. More importantly, it shows an improved predictive capability for landslides relative to the stand-alone TRIGRS model. This study highlights the important physical connection between rainfall, hydrological processes and slope stability, and provides a useful prototype model system for operational forecasting of flood and landslide.

Citation: Zhang, K., Xue, X., Hong, Y., Gourley, J. J., Lu, N., Wan, Z., Hong, Z., and Wooten, R.: iCRESTRIGRS: a coupled modeling system for cascading flood–landslide disaster forecasting, Hydrol. Earth Syst. Sci., 20, 5035-5048, https://doi.org/10.5194/hess-20-5035-2016, 2016.
Publications Copernicus
Download
Short summary
We developed a new approach to couple a distributed hydrological model, CREST, to a geotechnical landslide model, TRIGRS, to simulate both flood- and rainfall-triggered landslide hazards. By implementing more sophisticated and realistic representations of hydrological processes in the coupled model system, it shows better performance than the standalone landslide model in the case study. It highlights the important physical connection between rainfall, hydrological processes and slope stability.
We developed a new approach to couple a distributed hydrological model, CREST, to a geotechnical...
Share